Recording (VCR)

One-touch Timer Recording (OTR)

The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording.

DVD/VCR

4

4 5 2

STOP

One-touch Timer Recording (OTR)

Preparation:

Turn ON the TV and select the corresponding video input.

Press DVD/VCR to select the VCR mode. (The VCR indicator will light.)

Example: One-touch Timer Recording for 30 minutes.

Load a cassette tape with the erase

1 prevention tab intact.

The VCR will automatically turn on.

2 Press SP/SLP to select the desired tape speed SP or SLP.

The tape counter and SP or SLP will appear on the screen for about 4 seconds.

00 : 00 : 00 SP

3 Set “TV” or “CA TV” option to the appropriate position 27 .

TV - VHF/UHF channels

CATV - CABLE TV channels

4 Press Number button or CH / to select the channel to be recorded.

CH 110

5 Press OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of OTR will increase recording time as shown in the chart below, up to a maximum of 5 hours.

The OTR and recording time will appear on the screen for about 4 seconds. And, “ ”will keep blinking in the display.

Press

Recording time

Press

Recording time

once

NORMAL REC

6 times

3:00

twice

0:30

7 times

4:00

3 times

1:00

8 times

5:00

4 times

1:30

9 times

NORMAL REC

 

 

 

 

5 times

2:00

 

 

 

 

 

 

 

 

 

 

OTR 0 : 30

CH 125

INDEX

To cancel OTR

Press STOP or turn off the power.

" " will appear on screen for about 4 seconds.

Note:

If you wish to watch the DVD playback during OTR or standard recording, press DVD/VCR to change to DVD mode and perform

the DVD playback 43 .

36

Page 36
Image 36
Toshiba SD-V280 manual One-touch Timer Recording OTR, Set TV or CA TV option to the appropriate position, To cancel OTR