VocoPro UHF-3200 Getting connected, Connecting, Independent Mic Channels, Mixed Mic Channels

Getting connected

1.Connect the AC POWER ADAPTER to the UHF-3200 receiver’s POWER INPUT connector, then plug the ADAPTER into a compatible AC electrical outlet.

2.Attach the antennas by screwing in until secure. Be sure the antennas are pointing as straight up as possible.

3.Connect the UHF-3200’s receiver to a sound system, mixer or amplifier’s microphone input(s) with ¼” output jacks.

NOTE: There are two options when connecting the UHF-3200 to a mixer or amplifier.

1.Independent Mic Channels

a. Connect each mic channel independently to separate input channels on a mixer or amp. Do this by connecting a 1/4” cable from each mic channel (CH. A OUT and CH. B OUT) to individual inputs on your mixer or amp.

2.Mixed Mic Channels

b. Use the mixed output to connect both connecting a 1/4” cable from the MIX

microphone channels to a single mixer or amp channel. Do this by OUT jack to an input jack on your mixer or amp.

Connecting

AIN B IN

B OUT A OUT

MIX IN

MIX OUT

	DSP ECHO
POWER	DSP	SONIC
	REVERB	ENHANCER

CHANNEL-B
!	CAUTION
DC INPUT

	13V-18V .300mA	CH. B OUT	CH. A OUT	MIX OUT	SERIAL NO:
	LA VERNE CALIFORNIA
ANT-IN	U. S. A
TNC-50

IN	A OUT
	B OUT

CHANNEL-A

TNC-50	MIC	MIC
ANT-IN
	IN	IN

UHF-3200

8