HOW TO USE
Using your Vornado Heater is easy. Just follow these simple steps.
1.Position your heater so the vortex beam of warm air is directed across the room unobstructed. Position it in a location that
is representative of the room temperature. The unique side- angled air inlets allow the heater to be placed closer to walls than possible with most ordinary heaters (but do not place close to combustibles). Avoid areas of temperature extremes such as cold drafts and heat registers. Please refer to IMPORTANT INSTRUCTIONS at the beginning of this owner’s guide.
2.Plug the power cord into a standard wall outlet.
3.Press the POWER button.
4.Then press the MODE button to select LO (low heat), HI (high heat), or FA (fan only).
5.Press the WARMER button to raise the set temperature or COOLER to lower the set temperature. The unit will display the set temperature when the SET TEMP light is lit.
6.Your DVTH will generate only the heat required to obtain and maintain the set temperature.
CARE & MAINTENANCE
Your heater has no user serviceable parts. Do not disassemble the unit – it will void your warranty. If service is required, return your heater to Vornado (see Warranty section).
The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will require regular cleaning. Be sure to unplug the unit prior to any cleaning activity.
Use a vacuum cleaner with the brush attachment to clean any accumulated dust on the front grill and the side air inlets. During the
English 5