Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
1.Press MENU/SELECT twice to enter the directory.
2.Press 
CID or 
to scroll to the desired entry.
3.Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
1.Press MENU/SELECT and then press 
CID or 
to select 
Call log.
2.Press MENU/SELECT and then press 
CID or 
to scroll to the desired entry.
3.Press MENU/SELECT to dial the displayed number.
To access a number in the redial list while on a call:
1.Press REDIAL/PAUSE.
2.Press 
CID, 
or REDIAL/PAUSE repeatedly to browse to the desired entry.
3.Press MENU/SELECT to dial the displayed number.
• You cannot edit a directory entry while on a call. For more details about the directory, see page 14.
•You cannot copy a call log entry into the directory while on a call. For more details about the call log, see page 19.
•You cannot erase a redial entry while on a call. See below for more details about the redial memory.
•Press OFF/CANCEL to exit redial, directory or call log when you are on a call.
Redial list
The telephone stores the five most recently dialed numbers.
•When there are already five entries, the oldest entry is deleted to make room for the new entry.
•Entries are shown in reverse chronological order.
Review the redial list
1. Press REDIAL/PAUSE when the handset is not in use.
2. Press 
CID, 
or REDIAL/PAUSE repeatedly to browse the redial list.
13
