Telephone operation
Speed dial
You can store up to 10 telephone numbers with names in the speed dial memory locations you assign from the directory you wish to dial using fewer keys than usual. You must create an entry in the directory (see page 25) before you set the speed dial memory location.
The speed dial memory locations are stored in the telephone base and are shared by all handsets. Changes made to speed dial entries on one handset apply to all.
Store a speed dial entry
1.Press MENU/SELECT when the handset is not in use.
2.Press 
VOL/
or 
VOL/CID to select >Directory, then press
MENU/SELECT.
3.Press 
VOL/
or 
VOL/CID to select >Speed dial, then press
MENU/SELECT.
4.Press 
VOL/
or 
VOL/CID to choose the desired speed dial location, then press MENU/SELECT. The directory list displays.
5.Press 
VOL/
or 
VOL/CID to choose the desired directory entry, then press MENU/SELECT to confirm.
•If you choose an existing speed dial entry in step 4, the entry will be replaced by the new directory entry.
• The entries stored in the speed dial memory are numbered 0 to 9 and share the memory in the directory.
•If the location is not empty, the new entry replaces the old entry. The old entry will still be saved in the directory.
Dial a speed dial number
1.Press and hold the dial pad key
2.Press 
/FLASH or 
to dial the displayed number.
If the speed dial location you selected is empty, the screen displays <EMPTY>.
29
