Telephone settings

Home area code

If you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log.

1.Press MENU/SELECT when the handset is not in use.

2.Press VOL/ or VOL/CID to select >Settings, then press MENU/SELECT.

3.Press VOL/ or VOL/CID to select

>Home area code, then press MENU/SELECT.

4.Use the dialing keys to enter the desired home area code.

Press MUTE/REMOVE to delete a digit.

Press and hold MUTE/REMOVE to delete the entire entry.

5.Press MENU/SELECT to confirm.

>HOME AREA CODE DIAL MODE

HOME AREA CODE

___

If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed, following the steps above. After you have deleted the home area code, _ _ _ will appear in the display.

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone.

1.Press MENU/SELECT when the handset is not in use.

2.Press VOL/ or VOL/CID to select >Settings, then press MENU/SELECT.

3.Press VOL/ or VOL/CID to select >Dial mode, then press MENU/SELECT.

4.Press VOL/ or VOL/CID to choose Tone or Pulse.

5.Press MENU/SELECT to confirm your selection.

>DIAL MODE LCD LANGUAGE

DIAL MODE >TONE

While on a call, press TONE to temporarily change to tone dial mode.

13

Page 17
Image 17
VTech CS6329-3, CS6329-5, CS6329-4, CS6328-5, CS6329-2, CS6328-4 Dial mode, Home area code, then press MENU/SELECT