VTech DS6121-2, DS6121-3, DS6121-5, DS6122-5 user manual Remote access, Command Function

Answering system

Remote access

A two-digit security code is required to access the system remotely from any touch tone telephone. The preset code is 19; see page 37 to change it.

1.Dial your telephone number from any touch tone telephone.

2.When the system answers and plays your announcement, enter the two-digit security code.

3.After hearing a double beep, enter one of the following remote commands.

Command	Function
1	Play all messages.
2	Play only new messages.
3	Delete the current message (during playback).
33	Delete all messages.
4	Repeat the current message (during playback).
5	Stop.
*5	Hear a list of remote commands.
6	Skip to the next message (during playback).
*7	Record a new announcement.
8	End the call.
0	Turn the answering system on or off.

4. Hang up or press 8 to end the call.

•If no key is pressed after entering remote access, new messages will be played automatically. If there are no new messages, all old messages will be played automatically.

•Once the new messages have been played, the system will announce the help menu options. If no key is pressed within 20 seconds, the remote access call is automatically disconnected.

•When the answering system is turned off, the telephone will answer after 10 rings, and announce “Please enter your remote access code.”

Basic operationAnswering system

www.vtechphones.com 45