![](/images/new-backgrounds/1197450/19745037x1.webp)
Basic Operation
Caller ID Operation
flashes.
4.Press SELECT again. The number is automatically dialed.
When the number is correctly displayed for dialing, press ON.
Store a Call History Record in the Directory
1.Locate the record in the call history you want to store in the directory.
2.If you wish to change how the number is stored, press #. The screen displays alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1 + number).
3.Press SELECT, then press until PROGRAM flashes.
DIAL PROGRAM
OLD 28 5/01 5:40PM
4.Press SELECT.The screen displays the number and name.The cursor appears at the end of the name. Use ,
and the dial pad keys to edit the name. Press SELECT to move on and edit the number. Use
to backspace and make corrections. Press SELECT to confirm.
5.Follow the steps 7 through 11 in Store a Number/Name in the directory.
NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds and you will not be able to store a new number until you delete a stored number.
Display Screen Messages
Screen Displays: When:
PRIVATE | The other party is blocking name and/or number |
| information. |
|
|
UNKNOWN | Your phone company is unable to receive infor- |
| mation about this caller’s name and/or number. |
|
|
* (after the name) | This caller has called you more than once. |
|
|
18