Installation, Installing handset battery

Installation

1..Plug the battery connector securely into the jack inside the battery compartment according to the color-coded label..

2. Insert battery in the center of the battery compartment..

3Press down on the wired side until the battery securely snaps into place..

4..Neatly tuck the wires inside the battery compartment..

5.Position the battery compartment cover and slide it towards the unit until it clicks into place..

6.Put the handset in the base unit to start charging the new battery for at least 16 hours..

7. After the battery is fully charged, press ON on the handset and you should hear a dial tone..

•Use only the VTech battery and AC power adaptor supplied with this telephone..

•Recharging of a fully depleted battery may take up to 16 hours.. A fully charged battery could provide up to

5 hours of talk time, or up to 5 days of standby time..

•Place the handset in the base unit when not in use to ensure optimum performance..