Handset features, Cid/Vol | VTech gz2335, gz2338 guide

Handset features

•When the phone is not in use, press to display caller ID information..

•Press and hold for two seconds while in idle mode to adjust ringer volume.. A double beep will sound at the lowest setting..

•During a call, press to lower listening vol- ume.. A double beep will sound at the lowest setting..

• Press this button before dialing the number to make a call..

-OR-

Dial the number (use to backspace and correct digits), then press this button to make a call..

• Press any key except OFF, CID/VOL-, DIR/VOL+ to answer a call..

•While on a call, when there is a call waiting

alert, press this button to take the new call, then press this button again to return to the

original call..

• When the phone is in use, this button will glow steadily.. When a call is on hold, it will flash.

• Switch to a clear channel while on a call..

• While handset is not in use, press and hold to delete all records in the call log..

When viewing the call log, press to delete the current record..

PROG

•Press to enter programming mode while the handset is idle (off)..

•Press to store a programming op- tion, or to store a directory entry..

•When the phone is not in use, press to display directory entries..

•Press & hold for 2 seconds during idle mode to adjust ringer volume.. A double beep will sound when rhe lowest setting is reached..

• During a call, press to increase listening volume.. A double beep will sound when the highest setting is reached..

• During a call, press to hang up..

• While the handset is ringing, press to silence the ringer..

• Press and hold for two seconds while in idle mode to erase the MISSED CALLS display..

• During programming, press to exit without making changes..

• Press TALK, then press this button to call the last number dialed.. -OR-

Press this button, then press TALK to call the last number dialed..

• While handset is not in use, press this button twice to delete the last number dialed from this telephone..

•While dialing or entering numbers into the directory, press to insert a four-second dialing pause..

Basic operation