VTech I5808 manual VT2461 Mk1 Deregister a Single Handset, VT2461 Mk2a, Inch 4 conductor line cord

3.Hold down [PAGE] key for 5 seconds. When the LINE IN USE light begins to flash, release the [PAGE] key.

4.The HANDSET CHARGING light will blink 5 times. Within 5 seconds from when it stops blinking, press [PAGE] once.

VT2461 Mk1 DEREGISTER A SINGLE HANDSET

1.Unplug power from the Base. Remove spare battery pack.

2.Hold down [PAGE] while reconnecting power. When the POWER light begins to blink, release the [PAGE] key.

3.Press [PAGE] 1 to 4 times, corresponding to the Handset you wish to deregister. 4.Once you complete step #3, the HANDSET CHARGING light will blink back to you the number of times corresponding to the Handset you wish to deregister. Within 5 seconds from when it stops blinking, press [PAGE] once.

VT2461 Mk2a

1.Unplug power from the Base. Remove spare battery pack.

2.Hold down [PAGE] while reconnecting power. When the Base Display says 'Pr', release [PAGE].

3.Press [MENU]. The Display will say 'rh'.

4.Press [SELECT] to choose h1, h2, h3, h4 or AL (all). 5.Press [TIME/SET] to confirm.

Unplug power from the Base, then reconnect power to complete deregistration.

2455 De-register

DEREGISTER ALL HANDSETS

1.Unplug power from the Base. Remove spare battery pack.

2.Hold down [PAGE] while reconnecting power. When the POWER light begins to blink, release the [PAGE] key.

3.Hold down [PAGE] for 5 seconds. When the LINE IN USE light begins to flash, release the [PAGE] key.

4.The HANDSET CHARGING light will blink 5 times. Within 5 seconds from when it stops blinking, press [PAGE] once.

DEREGISTER A SINGLE HANDSET

1.Unplug power from the Base. Remove spare battery pack.

2.Hold down [PAGE] while reconnecting power. When the POWER light begins to blink, release the [PAGE] key.

3.Press [PAGE] 1 to 4 times, corresponding to the Handset you wish to deregister. 4.Once you complete step #3, the HANDSET CHARGING light will blink back to you the number of times corresponding to the Handset you wish to deregister. Within 5 seconds from when it stops blinking, press [PAGE] once.

8 inch 4 conductor line cord

Perform the following:

-Advise the customer that we will send him a replacement 8 inch 4 conductor line cord. -Inform the customer that he or she will receive the new replacement cord in U.S. Mail. -Verify and update the customer's profile with all address and telephone information.

-Place an internal referral request via CRSS to Research Advisor to place an order for the replacement line cord.

Perform the following: