VTech ia5829 manual Setting

Telephone Directory

first ring. Choose N for a normal ringing pattern.

8.Press SELECT or PROG to confirm your selection. If you chose Y, a D will be displayed with the directory entry.

NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be able to store a new number until you delete a stored number.

Edit a Number/Name Stored in the Directory

1.	Press	. The screen displays DIRECTORY.
2.	Press	or to scroll alphabetically through the entries stored in the directory.
	-OR-
	Press the dial pad key for the first letter of the entry you want to edit.
3.	When the screen displays the entry you want to edit, press SELECT. Then press
	or until EDIT flashes.

SPEED EDIT ERASE 8005959511

4.	Press SELECT. The screen displays the name and number. The cursor ap-
	pears at the end of the name. Use , and the dial pad keys to edit the
	name. Press SELECT to move on to edit the number. Use to backspace
	and make corrections. Press SELECT to move on to edit the distinctive ring
	setting.
5.	Press SELECT to save the edited information.
Delete a Number/Name Stored in the Directory
1.	Press	. The screen displays DIRECTORY.
2.	Press	or to scroll alphabetically through entries in the directory.
	-OR-
	Press the dial pad key for the first letter of the entry you want to delete.
3.	When the screen displays the entry you want to delete, press SELECT. Then press
	or	until ERASE flashes.

SPEED EDIT ERASE 8005959511

4.Press SELECT. The screen displays ERASE NO YES and the number. The current choice flashes.

5.	Press or until YES flashes.
6.	Press SELECT. You’ll hear a confirmation beep.

Basic Operation

17