Telephone Operation
Handset Operation
/ CID
•While on a call, press to decrease the volume. A double beep will sound when you reach the mini- mum setting.
•While phone is not in use, press to display caller ID information.
•While entering number or letters, press to delete last character entered.
(phone) / FLASH
•To make a call, press then dial the number. or dial the number (use < to back- space and correct digits),
then press 
(phone)/
FLASH.
•During a call, press to re- ceive an incoming call, if call waiting is activated.
•To answer a call, press
this or any key except 
(off).
HOLD
•Press to put a call on hold.
•To release hold, press it again or press phone or lift the handset of an ex- tension.
CHAN/ DELETE
•Press to switch to a clear channel while on a call.
•When viewing the all log, press to delete the cur- rent record displayed.
•Press and hold to delete all calls log while handset is idle.
SELECT
•Use SELECT in conjunction with PROG during handset programming.
/ 
•While on a call, press to in- crease the volume. A double beep will sound when you reach the maximum setting.
•While phone is not in use, press to display phonebook entries.
•While entering letters, press to advance cursor.
(off)
•To end a call, press this key or place handset in base.
•While programming, press
to exit.
•While paging, press 
to cancel.
REDIAL/PAUSE
•To call last number dialed, press REDIAL/PAUSE, then
press 
(phone)/FLASH -OR-
•Press 
(phone)/FLASH then press REDIAL/PAUSE.
•To delete the last number di- aled record, press twice while handset is idle.
•While entering numbers, press REDIAL/ PAUSE to in- sert a dialing pause.
PROG
•Press to enter programming mode with handset idle (on hook).
Basic Operation
9
