Basic Operation
Handset Operation
Call Forward
• A Handset (HS1) on an external call can forward it to the other Handset (HS2) by pressing and holding the INT key. The display of HS1 will initially show:
•HS2 can press ON to answer the call. NOTE: If HS2 does not answer the call in about 30
seconds, the external call will be returned to HS1 and the display will show:
If the returned call is not answered within another 30 seconds, the external call will end automatically.
Call Transfer
•A Handset (HS1) on an external call can forward it to the other Handset (HS2) by pressing the INT key.
NOTE: The external call is put on hold automatically.
•HS2 will ring, showing an intercom call.
•HS2 can answer the intercom call by pressing ON.
•Intercom call link is established while the external call is still on hold. HS1 may discuss the external call with HS2.
•When HS1 presses OFF, the external call is then transferred to HS2. CALL
TRANSFERRED will display on HS1 briefly.
NOTE: If there is no answer on HS2, HS1 can reconnect to the held call by pressing ON.
Conference Call
It is possible to establish a conference between two Handsets and the external line.
If a Handset already has a connection to the external line, the other Handset can join the call by pressing ON, a conference will be immediately established. Both Handsets will show:
Base Operation
From the Base Unit, you can use PAGE key to locate the Handsets for 60 seconds.
•When the Handset is in idle, press PAGE.The Handsets will display:
•To end the page at the Base, press PAGE again.
•To end the page at the Handset, press ON, SPEAKER or any dialing keys.
14
