VTech IP 5850 Handset Settings, Key to Ringer Volume, Ringer Tone, Key Tone preset to on

Handset Settings

Ringer Volume

• From the idle (OFF) mode, press SEL then or

key to RINGER VOLUME.

•Press SEL again. The current ringer volume will be shown:

• Press or keys or enter digit 0-6 to the desired ringer volume. The current ring tone is played and the volume bar is increased/de- creased each time the setting is adjusted. At the lowest setting, display will show:

NOTE: The Handset will not ring when a call comes in if Ringer Volume is set to the lowest setting.

• Press SEL to confirm the setting.

Ringer Tone

•From the idle (OFF) mode, press SEL thenor key to RINGER TONE.

•Press SEL then you are prompted to choose INTERCOM CALL or OUTSIDE CALL. Press

orkeys to select the desired option.

•Press SEL again.You can then useorkeys or enter digit 0-9 to sample the ring tone. The screen, for example, will show:

•Press SEL to confirm your setting.

Key Tone (preset to ON)

•From the idle (OFF) mode, press SEL then orkey to KEY TONE.

•Press SEL again. The current setting will be

shown. Pressorkeys to scroll to ON or OFF. When set to ON, the Handset will emit a beep whenever a key is pressed.

•When the desired option is shown, press SEL to confirm your selection.

Basic Operation

21