VTech IP 5850 Basic Operation Handset Settings, Handset Name preset as ‘VTECH’

Basic Operation

Handset Settings

Handset Name (preset as ‘VTECH’)

•It is possible to give each Handset its own unique name. The name is shown in the first line when the Handset is idle. The name can be a maximum of 16 characters in length.

•From the idle (OFF) mode, press SEL then orkey to HANDSET NAME.

•Press SEL again. The display will show the current setting, for example:

•Press DELETE to backspace then ‘spell’ the desired name.

NOTE: The characters are entered in the same way as for the phonebook, see the table on page 15.

•Press SEL to confirm the setting.

Language (preset to English)

•From the idle (OFF) mode, press SEL then orkey to LANGUAGE.

• Press SEL to select this option. Press or keys to scroll from English to French or Span- ish.

• Press SEL to confirm the setting.

DialType (preset toTone)

•From the idle (OFF) mode, press SEL then orkey to DIAL TYPE.

• Press SEL then use or key to scroll to TONE or PULSE.

• Press SEL to confirm your setting.

NOTE: When the phone is set for pulse dial mode, it is possible to switch to temporary tone mode during an ongoing call by pressing *TONE. Once pressed, tone will be used for rest of the call. After you hang up, the phone will return to pulse dialing for the next call.

22