Enter Base ID Code, Found Base | VTech QW2432 specs

			Registration and Operation	Started
			Registration and Operation
Enter Base ID Code				Getting
1.	After charging the	Handset,		Getting
1.	After charging the	Handset,
	remove it from its Charge Cradle,
	the screen will display:

2. Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit.

3. Press OK. The Handset will display: PLEASE WAIT!!

4. Wait approximately 15 seconds.

The Handset will display:

FOUND BASE V14

If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat step 2 to 4.

Congratulations! You can now enjoy the benefits of your multi-Handset system.

12

13

Image 13

VTech QW2432 important safety instructions Enter Base ID Code, Found Base

Contents

Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Connecting to phone line SetupChecking for dial tone Tone/Pulse selection Getting Started Installation of Battery Pack in Handset Getting Spare Battery Charger/Power Backup Function Charging Of Handset Battery Pack Wall Mounting Setup of the QW2422 Accessory Handset Registration and Operation of the QW2422 Accessory HandsetRegistration and Operation Found Base Enter Base ID Code Handset Icons Handset and Base IndicatorsIcon Description Base Leds Handset LEDsLED RDL Redial Soft Menu Functions Caller ID Call Waiting ID Calls Log Caller ID Handset Settings Register Range ExtenderRange EXTENDER, then press OK Extender MEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number Name Press the Edit softkey twice. Then choose Name or NUM To Edit a Name or a Number Select Base Ringer Volume and OFF Base SettingsSelect Base Ringer Melody Select Tone / Pulse Making Calls Handset and Base OperationAnswering Calls Redial from Base Unit Mute Function Volume ControlHold Function Flash Function Global Call from Base Page/Intercom From Base to ALL HandsetsIntercom key Handsfree Speakerphone Operation Low Battery IndicationBase Speakerphone Operation Line in Use Indication Conference Calling Message Waiting IndicationTransferring Calls Advanced Operations Additional Base Features Network Service FeaturesAdditional Handset Features Operation Headset OperationBelt Clip To purchase a Headset, call Maintenance Case Of Difficulty Handset Does Not Ring When You Receive a CallPhone Doesnt Work At All No Dial Tone Common Cure For Electronic Equipment You Hear Other Calls While Using Your Phone Warranty Statement FCC Part FCC Regulations FCC Part Size Technical Specifications Advanced Operations Getting StartedBasic Operation Additional Information Issue