Setup, Connecting to phone line | VTech QW2432 specification

Setup	Started
Setup
Plug the AC power adapter into an electrical outlet, and the DC connector into
the back of the base unit.	Getting
To AC outlet	Getting

To telephone socket outlet

AC adapter	To telephone
	jack

Connecting to phone line

Plug one end of the telephone line cord into the jack on the back of the base unit. Plug the other end of this cord into the wall jack.

Checking for dial tone

After the battery is charged press ON on the Handset. The Phone icon

will appear on the handset display, and you will hear dial tone. If not, see In Case of Difficulty.

Tone/Pulse selection

See BASE SETTINGS for details.

CAUTION: Use only the Qwest power supply provided with your Qwest

Unit.

IMPORTANT:

For best performance the QW2432

Should be installed as follows:

In an elevated location, in the center of the room, with no obstructions nearby.

In a location that is away from other electrical appliances such as microwave ovens, personal computers, or

televisions.

6

7

Image 7

VTech QW2432 important safety instructions Setup, Connecting to phone line, Checking for dial tone, Tone/Pulse selection

Contents

Important Safety Instructions Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Tone/Pulse selection SetupConnecting to phone line Checking for dial tone Getting Started Installation of Battery Pack in Handset Getting Spare Battery Charger/Power Backup Function Charging Of Handset Battery Pack Wall Mounting Setup of the QW2422 Accessory Handset Registration and Operation of the QW2422 Accessory HandsetRegistration and Operation Found Base Enter Base ID Code Handset Icons Handset and Base IndicatorsIcon Description Base Leds Handset LEDsLED RDL Redial Soft Menu Functions Caller ID Call Waiting ID Calls Log Caller ID Handset Settings Extender Range ExtenderRegister Range EXTENDER, then press OK MEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number Name Press the Edit softkey twice. Then choose Name or NUM To Edit a Name or a Number Select Tone / Pulse Base SettingsSelect Base Ringer Volume and OFF Select Base Ringer Melody Redial from Base Unit Handset and Base OperationMaking Calls Answering Calls Flash Function Volume ControlMute Function Hold Function Global Call from Base Page/Intercom From Base to ALL HandsetsIntercom key Line in Use Indication Low Battery IndicationHandsfree Speakerphone Operation Base Speakerphone Operation Conference Calling Message Waiting IndicationTransferring Calls Advanced Operations Additional Base Features Network Service FeaturesAdditional Handset Features To purchase a Headset, call Headset OperationOperation Belt Clip Maintenance No Dial Tone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesnt Work At All Common Cure For Electronic Equipment You Hear Other Calls While Using Your Phone Warranty Statement FCC Part FCC Regulations FCC Part Size Technical Specifications Additional Information Getting StartedAdvanced Operations Basic Operation Issue