INSTALLING THE BATTERY PACK
REPLACING THE HANDSET BATTERY PACK
Follow the steps below:
1.Remove the battery case cover by pressing on the ridged lines and sliding downward.
2.Discard the old battery pack. Don’t put the old battery pack in a trash compactor or a fire - it could burst. Please recycle.
3.Place the new battery pack in its housing with the metal contacts facing down.
4.Replace the battery case cover by sliding the cover upwards.
5.If the new battery pack is not already charged, place the Hand- set in the cradle of the Base Unit to allow it to charge for 16 hours.
CAUTION: To Reduce the Risk of Fire or Injury to Persons, Read and Follow the Instructions
1.Use only Sprint rechargeable bat- tery pack, or equivalent.
2.Do not dispose of the battery pack in a fire. The cell may explode.
IMPORTANT: Do not dispose of this battery pack into household gar- bage. For information on recycling or proper disposal, consult your local solid waste collection or disposal organization.
3.Do not open or mutilate the battery pack. Released electrolyte is cor- rosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
4.Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery pack or conductor may overheat and cause burns.
To purchase replacement battery packs, call VTech at
SPARE BATTERY CHARGER / POWER BACKUP FUNCTION
When the Spare Battery pack is installed in the Base Unit, the Sprint cordless phone uses this battery to provide operational backup in case of a power failure. If you have a fully charged battery pack in the Spare Battery charger and there is a power outage, you will still be able to place and receive calls on the Sprint cordless phone Handset for up to 4 hours.
The Spare Battery pack can also be used to replace a drained Handset battery to ensure uninterrupted use. Be sure to put the drained battery pack in the Spare Battery charger.
1 0
