QUICK REFERENCE GUIDE
FROM THE BASE
•Press SPEAKERPHONE, then wait for dial tone. Dial the desired phone number.
•To end your call, press SPEAKERPHONE again.
ANSWERING CALLS
FROM THE HANDSET:
•Press any key except OFF, Volume, INT.COM keys and 3 PPU keys.
•Press OFF to end your call.
FROM THE BASE:
•Press SPEAKERPHONE. To end your call, press SPEAKERPHONE again.
TEMPORARY TONE
•If your local telephone service requires rotary (PULSE) dialing, you can temporarily switch to TONE dialing for such purposes as accessing answering ma- chines,
•To switch from rotary to tone dialing during a call, press the
*TONE key. When you end your call by pressing OFF or returning the handset to the base unit, the phone will return to the rotary (PULSE) mode.
VOLUME CONTROL
FROM THE HANDSET
•The phone must be ON.
•Located on the side of the Hand- set, press the VOLUME UP or VOLUME DOWN keys to raise or lower the earpiece volume. There are 8 volume levels.
FROM THE BASE
•The Base Unit has its own volume control. The VOL Up and Down keys are located directly above the SPEAKERPHONE key.
RINGER CONTROL
FROM THE HANDSET
With the Handset in the idle (off) mode:
•Press MENU
•Using the 
/ 
soft keys, scroll until 3. Ringer Tone/Vol is highlighted
•Press ENTER
1 6
