•In the event of a power outage, or if your phone’s power cord is unplugged, the time setting will be lost.
Installation
Set Handset Date and Time
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming call. If you do not have caller ID service, you can set the date and time manually:
•Press PROG, then press 
or 
until DATE/TIME is displayed. Press SELECT.
•The month is flashing. Press 
or 
until the screen displays the correct month. Press SELECT.
•The day is flashing. Press 
or 
until the screen displays the correct day. Press SELECT.
•The hour is flashing. Press 
or 
until the screen displays the correct hour. Press SELECT.
•The minute is flashing. Press 
or 
until the screen displays the correct minute. Press SELECT.
•AM or PM is flashing. Press 
or 
to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the battery life.
• With the handset in idle (off) mode, press PROG.
• Press | or | until the screen displays RINGER: and the current setting. |
• Press SELECT. The current setting blinks, and you will hear a sample of the ring. | ||
• Press | or | to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone. |
• Press SELECT.
If you subscribe to DSL service:
If you hear noise during conversations and/or your caller ID features aren’t functioning properly, install a noise filter to the telephone line between the base unit and the telephone line jack. Contact your DSL provider to obtain a noise filter.
To single telephone jack (RJ11C)
Telephone line cord 
Noise filter
(For xDSL users)
GETTING STARTED | www.vtechphones.com |
