ADVANCED FUNCTIONS | ADVANCED FUNCTIONS |
Programming The Ringer
The handset ringer is capable of four different types of ringer tones for each line. The following sections detail how to change the different tones and to turn off a ringer on the handset.
Changing Ringer Tones
To program, the handset must be
OFF.
To select a different ringer type do the following:
Press and hold PROG until the PROG symbol appears on the display.
Press the # key.
Press:
1 for Handset LlNE 1
2 for Handset LlNE 2
3 for Baseset LlNE 1
4 for Baseset LlNE 2
ringer. The LCD will show what ringer is being programmed.
IPROGI
Press 1,2,3 or 4 to select a ringer
type.
Press MEM or OFF to store.
PROGRAMMING
THE RINGER TYPE
HANDSET MUST BE OFF
PRESSAND HOLD PROG
UNTILTHE PROG
SYMBOLAPPEARS
ON THE DISPLAY
3 for Baseset LlNE 1
4 for Baseset LINE 2
PRESS 1 2 3 or 4 TO SELECT^ ~ ~ N G TYPER
PRESS MEM or OFF TO STORE THE RINGER
Turning Off The Ringer
To turn off the ringer for a particular line do the following:
Press and hold PROG until the PROG symbol appears on the display
Press the # key
Press 1 for Handset LlNE 1 ringer, 2 for Handset LlNE 2 ringer.
Press 5 to turn off the ringer Press MEM or OFF to store.The
base ringers are controlled by ONIOFF switches.
Checking The Ringer Type
To test the present ringer type for a particular line do the following:
Press and hold PROG until the PROG symbol appears on the display
Press the # key
Press 1 for Handset LlNE 1 ringer, 2 for Handset CINE 2 ringer, 3 for Base LlNE 1 ringer, or 4 for Base LlNE 2 ringer
Press 0 to test the ringer Press MEM or OFF to exit
PROG and CLEAR Functions
The PROG and CLEAR functions can be accessed by pressing and holding the relevant key. For example, to clear the display, press and hold the CLEAR key for 2 seconds until the display is cleared. To enter program mode press and hold the MEM key for 2 seconds.
Advanced Dialing
There are two different ways to dial out a number:
1Press the LlNE key and wait for a dial tone. Then dial out the number you want either manually, using MEMORY (MEM) dialing or using
REDIAL.
2Enter the number you wish to dial onto the display first. Then press the LlNE key. This will dial out the number which is displayed on the LCD.
NOTE: The phone will dial out any number which is shown on the display. If you do not want to dial the number shown on the LCD, it can be changed by:
Use the CNFIBSP key to backspace one digit for each keypress. Additional digit$ can be entered. Press a LlNE key to dial the new number.
Press and hold CLEAR until the display is cleared, then dial normally.
Press the OFF key to clear the display, then dial normally. Wait for the display to clear, then .press LlNE and enter the number you wish to dial.
Changing Channels
In the unlikely event you notice interference when using your handset, press the INTCMICHAN key to switch to another channel. The display will briefly show the new channel number.
This has nothing to do with your two phone lines - only the radio link between the handset and base.
If the noise continues, see 'INCASE OF DIFFICULTY' onpage 30.
CHANGING
CHANNELS
In the unlikely event you notice interference
when using your
handset, press the
INT.COM/CHAN key to switch to a new channel
