BASIC OPERATIONS
From the Base Unit:
Press the desired LINE key and listen for dial tone. Dial the phone number. The correspond- ing LINE key on the Handset will blink. Press OFF to end your call.
REDIAL/PAUSE
From the Handset: Your VT 2931 Handset remembers the last 5 phone numbers you dialed. With the Handset off, press REDIAL/PAUSE. The Handset will display:
This is the last phone number dialed from the Handset. Press 
or 
to scroll through the previous numbers dialed. Once the desired number is displayed on the Handset, press the appropriate LINE key to dial.
From the Base Unit: Press REDIAL/PAUSE. The last number dialed from the Base Unit is displayed. Press the appropriate LINE key to dial.
ANSWERING CALLS
From the Handset:
1.Press the flashing LINE key. The LINE key will glow steadily and the Handset will display:
2.The Base Unit will display HANDSET IN USE, and the corresponding LlNE key will blink.
3.Press OFF to end your call.
From the Base:
1.Press the flashing LINE key. The LINE key will glow steadily and the Base Unit will display:
2.The corresponding LINE key on the Handset will blink while the Speakerphone is in use.
3.Press OFF to end your call.
HANDSET VOLUME
| Adjust the Handset volume with the | and | keys, located on the side | |
VOLUME | of the Handset. |
|
| |
The Handset will display the relative volume level as you adjust it. | ||||
KEYS | ||||
BASE SPEAKERPHONE VOLUME
Adjust the Base Unit volume with the 
and 
keys, located to the right of the dialpad. The Base will display the relative volume level as you adjust it. The Speakerphone volume can only be adjusted while the Base Unit is IN USE (in Speakerphone or Intercom mode).
MUTE
1. When you press the MUTE key while using the base speakerphone, you can hear your party’s voice, but your party can’t hear you.
2.While the call is muted, the MUTE indicator will be lit.
3.To go back to the
BASIC OPERATIONS
13
