VTech VT 2931 Base Unit Operation, Programming Speed Dial Numbers, Speed Dialing

BASE UNIT OPERATION

PROGRAMMING SPEED DIAL NUMBERS

1. Press PGM. The Base will display:

2. Press MEM. The Base will display :

3. Enter desired Location (0-9). The Base will display:

MIC

4.Use the Base dial pad to enter the letters (16 characters maximum).

See: DIRECTORY - TO STORE A NAME AND NUMBER for a guide to the characters.

To enter 2 characters located on the same key, or, to add a space, use the VOLUME

key. To backspace, press the VOLUME key.

For example, to enter the name 'DEAN':

•Press 3

•Press VOLUME

•Press 3 twice

•Press 2

• Press 6 twice

•Press PGM when you finish entering the name. The Base will display:

•Enter the telephone number you wish to store (32 digits maximum).

•Press PGM. You will hear a confirmation beep, and the screen will go blank.

STORING A PAUSE IN A DIALING SEQUENCE

To insert a pause while programming a speed dial number, press REDIAL/PAUSE at the appropriate point in the number sequence. This inserts a 2 second pause. A “P” appears in the display representing the pause. For longer pauses, press REDIAL/PAUSE two or more times. Each pause is treated as a stored digit.

SPEED DIALING

•Press LINE 1 or 2.

•Press MEM. Enter Location (0-9).

•Press OFF to end your call.

ADVANCED OPERATIONS

19