![](/images/new-backgrounds/1330767/33076747x1.webp)
IN CASE OF DIFFICULTY
YOU HEAR NOISE IN THE HANDSET, AND NONE OF THE KEYS OR BUTTONS WORK.
Make sure the power cord is plugged in.
COMMON CURE FOR ELECTRONIC EQUIPMENT
Electronics, like people, can sometimes get confused. If the unit does not seem to be responding normally, then try putting the handset in the cradle. If it does not seem to respond after trying this a few times, do the following (in the order listed):
1.Disconnect the power to the base.
2.Disconnect (remove) the handset battery pack.
3.Remove the base unit battery pack, where applicable.
4.Wait a few minutes.
5.Connect power to the base.
6.Install the handset battery pack.
7.Install the base unit battery pack, where applicable.
8.Place the handset in the base unit cradle. If the handset has not been recently charged, allow 8 hours before use.
ADDITIONAL INFORMATION
24