COMPONENT REMOVAL
Oven Control Panel (S Model)
WARNING: Always perform the Electrical Lockout/Tagout procedure before removing any sheet metal panels or attempting to service this equipment. Failure to comply with this procedure can cause property damage, injury or death.
WARNING: Perform the GAS LOCKOUT/TAGOUT procedure before servicing the unit.
1.Perform the ELECTRICAL LOCKOUT/TAGOUT procedure.
2.Perform the GAS LOCKOUT/TAGOUT procedure.
3.Rotate the yellow gas
Figure 4: Gas
4.Open the kick panel to gain access to the screw securing the control panel.
5.Loosen the setscrew from the yellow gas
6.Loosen the setscrew from the temperature control knob and remove the knob.
7.Remove the oven knob ring.
8.Remove the screw securing the control panel.
9.Remove the control panel by lifting the bottom up and removing it from the tab located at the top of the control panel.
10.Reverse the procedure to install the oven control panel.
11.Test the oven to verify proper operation.
Figure 5: S Model Control Panel Removal
Oven Control Panel (C Model)
WARNING: Always perform the Electrical Lockout/Tagout procedure before removing any sheet metal panels or attempting to service this equipment. Failure to comply with this procedure can cause property damage, injury or death.
WARNING: Perform the GAS LOCKOUT/TAGOUT procedure before servicing the unit.
1.Perform the ELECTRICAL LOCKOUT/TAGOUT procedure.
2.Perform the GAS LOCKOUT/TAGOUT procedure.
Page 9 of 36
