Vulcan-Hart GL80E, ML-52637 CONTROLS - KETTLES WITH ELECTRONIC IGNITION Prior Construction, Fig

CONTROLS — KETTLES WITH ELECTRONIC IGNITION (Prior Construction, Fig. 2)

Thermostat	—	Controls heat in the kettle. High dial settings are for cooking; low
		settings are for holding.
On – Off Switch	—	Located on the upper right-hand corner of the control panel.
		When turned to ON, initiates the electronic ignition system.
Combination Control Valve —		Controls gas flow to the main burner. The valve has a built in
		gas pressure regulator which shuts off all gas in the event of pilot
		outage.
Pressure Gauge	—	Indicates pressure in the jacket, normal operating range is 0 to
		12 psig.

LID

KETTLE

JACKET

ON – OFF SWITCH

OFF

THERMOSTAT

PRESSURE GAUGE

JACKET WATER LEVEL

LID

KETTLE

JACKET

OFF

THERMOSTAT

PRESSURE GAUGE

JACKET WATER LEVEL

	COMBINATION		COMBINATION
	CONTROL VALVE		CONTROL VALVE
	(Built before September 2003)		(Built before November 2002)
Fig. 2		Fig. 3

CONTROLS — KETTLES WITH MANUAL PILOT BURNER (Prior Construction, Fig. 3)

Thermostat	—	Controls heat in the kettle. High dial settings are for cooking; low
		settings are for holding.
Combination Control Valve —		Controls gas flow to the main burner. The valve has a built in
		gas pressure regulator which shuts off all gas in the event of pilot
		outage.
		Indicates pressure in the jacket, normal operating range is 0 to
Pressure Gauge	—	12 psig.		23
23			– 8 –