Base Connections

STEP 1: Disconnect the handset cord from your telephone’s base.

STEP 2: Plug short end of T-cord into the now empty handset port on your phone.

STEP 3: Plug the other (longer) end of the T-cord into the port on the B200 base marked Phone . Thread cord under the hooks on the base.

STEP 4: Plug the handset into the port on the T-cord.

STEP 5: Plug the AC Adapter into the AC port on the bottom of the B200 base and then plug the AC adapter into a standard 110V electrical outlet.

INSTALLATION B: Phones with headset ports (Cisco phones see Installation C).

STEP 1: Plug the short end of the T-cord into the headset port on your phone.

STEP 2: Plug the other (longer) end of the T-cord into the port on the B200 base marked Phone . Thread cord under the hooks on the base.

STEP 3: Plug the AC Adapter into the AC port on the bottom of the B200 base and then plug the AC adapter into a standard 110V electrical outlet.

INSTALLATION C: Cisco Phones (Models 7940 or higher. Headset port required.)

STEP 1: Plug blue banded end of patch cord into headset port your phone.

STEP 2: Plug the other end of the patch cord into the port on the B200 base, marked Phone . Thread cord under the hooks on the base.

STEP 3: Plug the AC adapter into the AC port on the bottom of the B200 base and then plug the AC adapter into a standard 110V electrical outlet.

Allow cords to exit through the curved opening on the base. Cords may be bundled together with the cord wraps.

A:For phones without headset ports

Use T-cord (plug short end into the phone)

C : For Cisco phones (7940 or higher)

Use patch cord (plug blue-banded end into head- set port on the phone)

B : For phones with headset ports

Use T-cord (plug short end into the phone)

AC adapter T-cord or patch cord port

10	11

VXI B200 manual Base Connections