R E A R V I E W
Stand Adjustment Lever Pull this lever to adjust the stand. Release the lever to lock the stand in place.
Digital/Analog (DVI/VGA) Switch Use this switch to correctly set Cintiq for the video connection you will be using.
CAUTION Be careful to avoid catching your finger in the gap of the movable portion of the stand.
Important: Be sure to adjust the tilt angle of the stand to the low tilt position before packaging Cintiq. If you do not close the stand, the notched mechanism may be damaged during transportation and storage. Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving Cintiq, always do so by grasping the main body casing.
Connector Panel Cover To remove the cover, slide it to the right.
Stand
The stand can be used to adjust the tilt angle of the unit from a low position (18° from horizontal) to a high position (73° from horizontal).
Next Step: Installation. See page 12
11