Precautions on Use and Handling

Be sure to follow all instructions, cautions, and warnings found within this manual. Failure to do so could void your warranty, in which case Wacom shall have no responsibility to repair or replace the product.

P H Y S I C A L L O C A T I O N

WARNING ■ Do not use the Cintiq Interactive Pen Display in a facility control system that requires extremely high reliability; it may cause other electronic devices to malfunc- tion, or other devices may cause the Interactive Pen Display to malfunction. Where use is prohibited, power off Cintiq to prevent the possibility of it causing other electronic devices to malfunction. Wacom does not accept any liability for direct or consequential damages. For details, please refer to your Warranty, located at the end of this manual.

E N V I R O N M E N T

■Temperature and Humidity

–

Operating temperature and humidity

5˚ to 35˚C, 20 to 80% RH

–

Storage temperature and humidity

-10˚ to 60˚C, 20 to 90% RH

CAUTION ■ Do not use or store Cintiq where:

CAUTION ■

U S A G E

WARNING ■

CAUTION ■

CAUTION ■

CAUTION ■

CAUTION ■

■

–Temperature changes are severe or exceed specifications (e.g., outdoors or inside a vehicle).

–Cintiq and the Grip Pen are exposed to direct sunlight or heat from an appliance.

–Cintiq and the Grip Pen are exposed to water or any other kind of liquid.

Do not use Cintiq in a dusty environment; this may damage the unit.

Only use the power supply that came with Cintiq. If a different type of power supply is used, Cintiq will not work properly or may be damaged. Using a different

type of power supply also has the potential to result in fire. Use of a different power supply will void your warranty.

Be sure to use a grounded power source when applying power to Cintiq.

Do not connect or disconnect the video cable or power cables while Cintiq or your computer are turned on; this may damage the LCD display or computer video card. In this case, Wacom shall have no responsibility to repair or replace the product.

This product is for use with a DVI or VGA video card; using an inappropriate video

card may damage Cintiq.

Do not block the rear panel ventilation holes; this may overheat and damage the unit.

When not using Cintiq for long periods of time, unplug the power supply cable from the power source.

3