U S I N G A N A L T E R N A T E M O U N T O R S T A N D
If you will be using Cintiq in an installation that requires the use of an alternate mounting platform, you can remove the adjustable stand from the unit and mount the pen display onto a VESA conforming mount arm or stand. A VESA mounting platform will require mount screws that are 4 mm wide with a
0.7mm pitch (M4 Regular), and a maxi- mum screw clearance depth of 15 mm. Exceeding the clearance depth of 15 mm will damage Cintiq internal components.
To remove the adjustable stand and attach Cintiq to a different mounting platform:
1.Turn off your computer and power off Cintiq. Then disconnect all cables from the unit.
2.Protect the display screen surface by spreading a soft cloth onto a flat table and placing Cintiq face down on the cloth.
3.Remove the four screws and lift the adjustable stand assembly away from the body of the unit.
4.Using the appropriate screws for your mounting platform, firmly at- tach Cintiq to the alternate mounting platform.
5.Refer to the appropriate installation instructions, beginning on page 12, and reattach the cabling.
CAUTION When attaching Cintiq onto an alternate mounting platform, be sure to follow all instructions in the documentation supplied by the platform manufacturer. If improperly installed, the unit could fall, resulting in damage to the unit or physical injury.
42