The Wadia 270 can be programmed to play the tracks on a CD in a particular order. To program a sequence follow these steps:
1.Press the PROGRAM button on the remote. The program indicator will illuminate in the display window.
2.Press the numeric buttons of the tracks you would like to program in the sequence desired. The number of each selected track will be indicated under the track indicator, the location of that track within the program (the playing order) of the tracks selected will be indicated in the area where index is usually identified, and the total program playback time
of the sequence will be updated as each track is programmed.
3.When you have entered the track number of all the tracks you want included in the program, press PLAY.
A program will continue to be held in memory even after that program has played completely.
When programmed playback is ended by pressing the stop button, the program will continue to be held in memory. However, if the stop button is pressed a second time, the program indicator on the display will go out and the programmed contents will be erased from memory. Turning off the AC power will also erase the program.
You can use the following keys for additional programming functions:
DELETE: Pressing this button while a program is being entered erases the entire entered program. To play an entire disc, except for specific tracks that you do not want to hear, press this button and then the numeric keys corresponding to the tracks you would like to delete (up to 20 selections).
CLEAR: To eliminate a particular track from a programmed sequence, first press the check button until the track which you would like to eliminate is selected. Then press the clear button which will clear that particular track from memory.
