Solutions if Experiencing Spray Issues
Clear the
Spray Tip 
Start | 1 What you’ll need |
•Scrap material/cardboard
Do not attempt to unclog or clean the tip with your finger. High pressure fluid can cause injection injury.
2 |
|
|
|
| K |
|
| C |
| O | |
| L |
|
3 |
|
|
OFF |
| O |
|
| |
2.Release trigger and lock spray gun
3.Turn power OFF
4 |
4.Rotate reversible spray tip 180 degrees to CLEAN position (arrow pointing toward rear of spray gun)
Note: If spray tip is difficult to rotate relieve pressure by turning PRIME/SPRAY knob to PRIME and squeeze trigger while pointing at scrap material/cardboard. Release trigger and try rotating spray tip again
5 |
|
| N |
|
|
|
|
| |
|
| R |
| |
| U |
|
| |
| T |
|
|
|
6 |
|
|
|
|
| ON |
| l | |
|
|
| ||
5.Turn knob to SPRAY
6.Turn power ON
7 |
|
|
|
|
| C | K |
|
|
| |
| O |
| |
L |
|
| |
N |
|
|
|
U |
|
|
|
7. Unlock spray gun | |||
8 |
8.Point at scrap material/cardboard and squeeze trigger until material comes out in a high pressure stream. Release trigger and lock spray gun
9 |
9.Reverse spray tip so arrow points forward and resume spraying
English
Solutions if Experiencing Spray Issues • Clear the Spray Tip | 13 |
