Using the Wagner Paint Crew
Proper Use and
Functions
Specifications
Weight | 25 lbs |
Capacity | 2 gallon hopper |
Power source . . . . . . . . . . . . . .½ Hp universal motor
Power requirement . . . . . . . . . .15 amp minimum circuit on 120 VAC, 60 Hz current
Generator . . . . . . . . . . . . . . . . .8000 Watt
Max. spraying pressure . . . . . .2800 PSI
Controls and Functions
ON/OFF Switch: The ON/ OFF switch turns power to sprayer on and off (O=OFF,=ON)
PRIME/SPRAY Knob: The PRIME/SPRAY knob directs material to the material return tube when set to PRIME (figure
A)or to spray hose when set to
SPRAY (figure B)
PRIME |
Figure A. |
SPRAY |
Figure B.
Spray Hose: The spray hose connects the spray gun to the pump
Spray Gun: The spray gun controls the delivery of material being pumped
Material Return Tube: Fluid is sent back out through the return tube and into the
hopper when the PRIME/
SPRAY knob is in the PRIME
position
Capability
Sprays a variety of paints
Do not use!
This pump should not be used with textured materials, block filler, lacquers, industrial enamels, or asphalt sealer or materials containing HHC. See coating supplier if flash point is not listed on the container
Safety features
Spray gun trigger lock and pressure diffuser; built- in tip safety guard; PRIME/SPRAY knob for safe pressure release. Conforms to ULSTD 1450. Certified to CAN/CSAC 22.2 NO
6 | Using the Wagner Paint Crew • Proper Use and Functions |
|
English | ||
|
|
|
