Clean the
Spray Gun | important: Never clean |
object. | |
| filter by poking with sharp |
Filter |
|
Tips if Experiencing Spray Issues
3 |
PULL |
Start | 1 What you’ll need |
•Wrench
•Warm, soapy water for latex material
•Mineral spirits for oil based materials
•Replacement spray gun filter
(if necessary)
2 Perform Pressure Relief Procedure
Page 7
3.Pull trigger guard to separate from filter housing
4.Unscrew filter housing using a wrench
5 |
5.Remove filter from housing
English
6 | 7 | 8 |
6. Clean with appropriate | 7. Inspect |
|
cleaning solution for material | filter for | 8. Replace cleaned filter, tapered end first, |
being used; warm, soapy water | damage and | into gun housing. Note: It is important to place |
for latex material and mineral | replace if rips | tapered end first to ensure proper sprayer |
spirits for oil based material | are found | operation |
Tips if Experiencing Spray Issues • Clean the Spray Gun Filter
9 |
9.Reassemble spray gun
15
