WALKER W-300 FEATURES
pulse mode, switch to tone mode to interact with the automated answering system, switch back to pulse mode when your call is done. When switching from Pulse to Tone during a call, there will be a 3 second delay from the time you first push a key in tone mode until the key press is transmitted. You cannot switch from tone to pulse during a call.
Important: You must have tone signaling service to use the TONE feature on the Walker
➤To Operate Last Number Redial:
1.Depress the hookswitch to get a new dial tone.
2.Press the “Redial” Button once.
3.Stay on the line, and your call will be dialed.
The last number dialed will be stored in the Walker
➤To Set the TONE/PULSE Switch:
1.Move the switch towards the correct setting.
2.Depress the hookswitch once.
3.The phone will now dial in the mode you selected.
➤Last Number Redial
Last Number Redial allows you to auto- matically redial the last telephone number you called. This feature is convenient for redialing numbers which are busy. The phone number stored for redial will be reset with every new call you make.
➤Flash
Flash is a special feature that is required to use some calling services provided by your local phone company, such as call waiting. Consult your guide to these services which is available from your local phone company. Flash serves the same purpose as pressing and releasing the hook switch very quickly.
➤To Use the Flash Feature:
Simply press the Flash button at the appropriate time as outlined in the guide provided by your local phone company.
14 | Walker |
