PROGRAMMING NUMBERS INTO MEMORY
E N G
➤Programming
The Walker
Preprinted inserts have been provided for you to place in the extra large program- mable buttons. To remove the button covers, locate the ridge on the right and left side of the button. Grasp the ridge with your finger tips and pull up on the button, removing it from the telephone. Insert the selected symbol into the button cover and place back into the telephone.
➤To Program Numbers into the Walker W-300 Telephone
1.Select the location you wish to store for each memory button. The Walker
2.Select the correct TONE/PULSE setting you normally dial in. (Remember, some long distance services require TONE dialing.)
3.Pick up the handset from the phone base, press and release the “PROGRAM” button on the base unit.
4.Dial the number you wish to store. The number is not transmitted while you are programming it. You can program a pause into the dialing sequence, if necessary. Since there is not a separate pause button on the phone, the redial button serves this purpose during programming. Remember, you can store up to 32 digits and the pause function counts as 1 of those digits.
Note: Programming in the pause function will cause the phone to wait 3 seconds before dialing any more numbers. For example: Pressing a memory button that has
5.Press the “PROGRAM” button again.
6.Select the appropriate memory storage button. Press and release this button.
7.Place handset back into cradle.
8.Repeat steps 3 through 7 for all other memory storage locations.
➤To Dial Programmed Numbers
1.Pick up the handset and listen for a dial tone.
2.Press the appropriate Memory Storage Button.
3.The number will be dialed automatically.
L
I
S
H
17
