Walker W-300 manual To Use the Hold Feature, Surge Protection, Headset Port, Backlite Keypad

WALKER W-300 FEATURES

E N G

➤Hold

This advanced feature on your Walker W-300 allows you to put a call on hold, hang up and switch to another extension or have a private conversation that you don’t want the person on the other end of the phone to hear.

You will be able to hear the person on the other end, but they won’t be able to hear you while the hold indicator light is on.

The hold light will be on any time the hold button has been pressed. A call will stay on hold until you pick up a receiver, or press and release the hook switch. Press- ing the hold button a second time

will not take the call off hold.

➤To Use the Hold Feature:

1.While a telephone call is in progress, press the hold button once to place the call on hold. The red hold light will turn on.

2.Hang up the receiver.

3.To take the call off hold:

A. Simply lift the Walker Clarity receiver out of the cradle.

-OR-

B. Pick up another telephone extension in your home.

-OR-

C. If you did not return the handset to the cradle after pushing the hold button, press and release the hook switch once only.

4. The hold light will turn off.

➤Surge Protection

The unit is equipped with a resettable fuse. The fuse will automatically reset within 30 minutes after activation once the surge condition has subsided.

➤Headset Port

The W-300 is equipped with a 2.5 mm jack for use with a compatible headset, allowing for use in a hands free mode. To attach headset, plug the headset into the headset port located on the right side of the telephone. Depressing the headset button on the front allows calls to be made without lifting the handset to seize the line. When the headset is plugged in, the handset is disabled.

➤Backlite Keypad

The keypad features large translusent back lite buttons that will make calling easier.

L

I

S

H

15