![](/images/new-backgrounds/1331652/33165243x1.webp)
OPERATION |
DESIGN FEATURES
Loaded with Standard Features
•Multiple process DC output range: 5 - 350 Amps
•200 – 600 VAC, 1/3 phase,
•New and Improved Line Voltage Compensation holds the output constant over wide input voltage fluctuations.
•Utilizes next generation microprocessor control, based on the ArcLink® platform.
•State of the art power electronics technology yields superior welding capability.
•Electronic over current protection
•Input over voltage protection.
•F.A.N. (fan as needed). Cooling fan only runs when needed.
•Thermostatically protected for safety and reliability.
•Ethernet connectivity.
•Panel mounted Status and Thermal LED indicators facilitate quick and easy troubleshooting.
•Potted PC boards for enhanced ruggedness/relia- bility.
•Enclosure reinforced with heavy duty aluminum extrusions for mechanical toughness
•Waveform Control Technology™ for good weld appearance and low spatter, even when welding nickel alloys.
•Sync Tandem installed.
•
CASE FRONT CONTROLS
(See Figure B.1)
1.USER INTERFACE (optional)
2.STATUS LED - (See Troubleshooting Section for operational functions)
3.THERMAL LED - Indicates when machine has thermal fault.
4.POWER SWITCH - Controls power to the Power Wave® S350.
5.NEGATIVE WELD OUTPUT
6.POSITIVE WELD OUTPUT
7.WORK SENSE LEAD CONNECTOR
8.12-PIN CONNECTOR (Optional)
FIGURE B.1
1
2 3
4
5
67
8