Sony HD 3CCD Specifications, System, Input/output connectors, General, Supplied accessories

Appendix

Specifications

System

Video signal	1080/59.94i, 1080/50i (switched with
	the BOTTOM switch)
Synchronization
	Internal/external synchronization,
	automatically switched
Image device	1/3 type (6 mm), 3CCD Interline
	transfer type
	Total picture elements: Approx.
	1,120,000 pixels
	Effective picture elements: Approx.
	1,020,000 pixels
Lens	Carl Zeiss Vario-SonnarT*
	12× (optical), 4× (digital)
	Filter diameter: 72 mm (Wide and
	tele conversion lenses cannot be
	attached.)
	f = 4.5 – 54 mm, F1.6 – F2.8
	F = 32.5 mm – 390 mm (equivalent
	to the focal length of a 35-mm
	camera)

Minimum object distance

800mm (11 7/8 inches) (TELE end) Minimum illumination

6lux (F1.6) with 50 IRE (WIDE end)

Shutter speed	1/59.94 (1/50) to 1/10,000 sec.
Video S/N	50 dB
Pan/tilt action	Horizontal: ±170 degrees

Maximum panning speed: 60 degrees/sec.

Minimum panning speed: 0.25 degrees/sec.

Vertical: +90 degrees, -30 degrees Maximum tilting speed: 60 degrees/ sec.

Minimum tilting speed: 0.25 degrees/sec.

Input/output connectors

Video output

D-sub 15-pin

RGB: 0.7Vp-p (no sync, at 75-ohm termination)

1Vp-p (±0.3V, tri-level sync, at 75-ohm termination) Component :

Y:1Vp-p (±0.3V, tri-level sync, at 75-ohm termination)

Pb/Pr: ±350 mVp-p, 75-ohm terminated

HD/VD Sync: 1Vp-p, 75-ohm terminated

Tri-level Sync: ±300 mVp-p, 75- ohm terminated

External sync input

EXT SYNC IN: BNC type Control input/output

VISCA RS-232C IN: Mini DIN 8-pin type

VISCA RS-232C OUT: Mini DIN 8- pin type

VISCA RS-422: 9-pin type Control signal format

9600 bps/38400 bps Data: 8 bit

Stop bit: 1

Power connector

JEITA type4 (DC IN 12V)

General

Input voltage 12 V DC (10.8 to 13.2 V DC) Current consumption

2.0A max. (at 12 V DC), 24 W without optional interface board

Operating temperature

0ºC to 40ºC (32ºF to 104ºF) Storage temperature

–20ºC to +60ºC (-4ºF to 140ºF)

Dimensions Video camera: ø207 × 315.8 mm (ø8 1/4 × 12 1/2 inches) (diameter/h) (excluding protruding parts)

Remote Commander: 56 × 26 × 210

mm(2 1/4 × 1 1/16 × 8 3/8 inches) (w/

h/d)

Mass	Video camera: Approx. 4.5 kg (9 lb 15
	oz)

Remote Commander: 110 g (3.9 oz) Installation angle

Less than ±15 degrees to the horizontal surface

Supplied accessories

AC power adaptor MPA-AC1 (Sony) (100 V AC, 50/60 Hz) (1)

AC power cord (1) Remote Commander (1) Ceiling bracket (A) (1) Ceiling bracket (B) (1) Wire rope (1)

Screws (3M3 × 8) (7)

Screw (3M4 × 8) (1) RS-422 connector plug (1) Operating Instructions (1)

Design and specifications are subject to change without notice.

72

Specifications