Sony HD 3CCD operating instructions Connecting a Video Switcher, Cable Second BRC

FUNCTION switch on the rear of the Optical Multiplex Unit (page 25) and the DIP switch on the bottom of the Remote Control Unit (page 23) are set to RS-232C or RS-422 correctly.

Notes on use of the CCFC-M100HG HD Optical Fiber Cable

•In order to prevent cable transmission loss, fix the bend in the cable keeping more than 40 mm (1 5/8 inches) radius.

CCFC-

M100HG

BRC-H700

Keep more than 40 mm (1 5/8 inches) radius.

BRU-H700

CCFC-M100HG

•To connect two Optical Fiber Cables, use the extension plug supplied with the cable.

Extension plug

B

A

Connecting a Video Switcher

Use a commercially available video switcher to switch between the multiple camera signals to be output.

Third to Seventh

BRC-H700

					to AC outlet
VISCA RS-					RGB/
232C IN
				COMPONENT			available)
RS-232C cable
VISCA RS-232C			cable		Second BRC-	available)(commerciallyconnectorspin-15sub-Dwith	(commerciallyconnectorspin-15sub-DwithcableConnecting
OUT					H700
VISCA RS-				to	RGB/
232C IN				COMPONENT
RS-232C cable
VISCA RS-232C					First BRC-
					H700
OUT
VISCA RS-
232C IN
			RS-232C
		VISCA RS-232C				Connecting cable	componentvideo input
MODE RS-232C		RS-422	TALLY/CONTACT	to	ON/OFF
	VISCA			TALLY
	1	9	1	9
				CONTACT DC IN 12V
RM-BR300 Remote				TALLY/
Control Unit				CONTACT

CONTACT to

Video switcher (commercially available)

For connection with a video switcher, refer to the Operating Instructions of the switcher.

Installation and Connections

Connections

61