Sony HD 3CCD Camera buttons, Mode selector, Visca RS-232C connector, Visca RS-422 connector

Hold down this button and press CAMERA button 1 to 7 to turn on/off the power of the camera corresponding to the pressed button.

SCAMERA buttons

Press one of the buttons to select the camera from among those connected. The selected CAMERA button lights in blue.

TPOSITION buttons

You can store the various camera settings such as the pan, tilt and zoom positions to the memory of the camera corresponding to each POSITION button, and load the settings in the memory.

Rear/Bottom
MODE RS-232C	VISCA	RS-422	TALLY/CONTACT		CONTACT(TALLY) ! ON/OFF
					TALLY
	1	9	1	9	CONTACT DC IN 12V
wa ws wd				wf wgwh wj wk

UMODE selector

Select the position corresponding to the VISCA- controllable camera to be connected.

Switch position	Camera mode
0	Automatically selected (default)
1	BRC-300/300P
2	EVI-D70/D70P
3	EVI-D100/D100P
4	EVI-D30/D30P
5	SNC-RZ30N
6	BRC-H700

Note

Set the selector to position 6 when all the connected cameras are BRC-H700s. For other connections, set the selector to position 0.

VVISCA RS-232C connector

Connect to the VISCA RS-232C IN connector of the camera or the BRU-H700 HD Optical Multiplex Unit.

WVISCA RS-422 connector

Connect to the VISCA RS-422 connector of the camera or the BRU-H700 HD Optical Multiplex Unit.

An RS-422 connector plug is attached at the factory.

XTALLY/CONTACT connector

This connector is used for the tally lamp input or the contact output.

Select the function of the connector using the TALLY/CONTACT selector.

An RS-422 connector plug is attached at the factory.

YTALLY/CONTACT selector

Select the function of the TALLY/CONTACT connector.

TALLY: The tally lamp of the camera selected with the connected switcher lights.

CONTACT: The contact output corresponding to the camera address selected with the Remote Control Unit is short-circuited against the connected switcher.

CONTACT (TALLY): The contact output corresponding to the camera address selected with the Remote Control Unit is short-circuited against the connected switcher and the tally lamp of the camera selected with the connected switcher lights.

Note

Change the setting of the selector before you turn on the power of the Remote Control Unit. Otherwise, the setting is not effective.

wh DC IN 12V connector

Connect the supplied AC power adaptor.

wj DIP switches (bottom)

Switch 1 (RS-232C/RS-422 selector)

Set to ON for RS-422, or OFF for RS-232C.

Switch 2 (Communication baud rate selector) Set to ON for 38400bps, or OFF for 9600bps.

Note

Set the DIP switches before you turn on the power of the Remote Control Unit. Otherwise, the setting is not effective.

wk ON/OFF switch

Press this switch to turn on/off the Remote Control Unit.

Overview

Location and Function of Parts

23