Sony HD 3CCD operating instructions PAN Tilt Zoom Menu, Ramp Curve, Zoom digital zoom

PAN TILT ZOOM Menu

The PAN TILT ZOOM menu is used to select the pan/ tilt/zoom mode.

		<PAN TILT	ZOOM>
		PAN-TILT	LIMIT
		> PAN		OFF
		LEFT		END
		RIGHT		END
		TILT		OFF
		DOWN		END
		UP		END
		RAMP CURVE		MODE1
		D-ZOOM		x4.0
Adjusting
	PAN-TILT LIMIT
and	When you set PAN to ON, you can select the limit of pan
	operation with the LEFT and RIGHT setting items.
Setting
	operation with the UP and DOWN setting items.
	When you set TILT to ON, you can select the limit of tilt
With	You can select the following values:
Menus	PAN LEFT: END, 169° to –169°, selectable with an

interval of 1°

PAN RIGHT: END, –169° to 169°, selectable with an interval of 1°

TILT DOWN: END, –29° to 89°, selectable with an interval of 1°

TILT UP: END, 89° to –29°, selectable with an interval of 1°

Setting range of PAN LEFT/PAN RIGHT

CENTER (±0°)

169° –169°

END END

(170°) (–170°)

Setting range of TILT DOWN/TILT UP

END (90°)

89°

±0°

–29°

END (–30°)

Note

The PAN-TILT LIMIT setting is reset to the factory setting when you change IM-FLIP of the SYSTEM menu.

RAMP CURVE

Select the panning and tilting speed acceleration or reduction mode when the preset panning and tilting operation is recalled.

MODE1: Panning/tilting speed accelerates or reduces most sharply.

MODE2: Panning/tilting speed accelerates or reduces moderately.

MODE3: Panning/tilting speed accelerates or reduces most gently.

D-ZOOM (digital zoom)

When you select digital zoom magnification (4×, 2× or 1.5×), the selected electronic zoom operates after the optical zoom (12×). You can zoom up to 48× at maximum.

When this item is set to OFF, the digital zoom function is disabled.

Note

Regardless of the D-ZOOM setting, images shot by the camera are accumulated for the vertical synchronization period and output from the RGB/COMPONENT connector of the camera and the connector on the optional interface board inserted into the card slot.

34

PAN TILT ZOOM Menu