Status Menu, Down Converter Menu, SUB OUT1, ADD Sync

STATUS Menu

The STATUS menu is used to display the settings selected with the menus.

The STATUS menu consists of PAGE1 to PAGE5. This menu only displays the current menu settings, and you cannot change them with the menu.

PAGE1: Shows the settings selected with the EXPOSURE and FOCUS menus.

PAGE2: Shows the settings selected with the COLOR menu.

PAGE3: Shows the settings selected with the PAN TILT ZOOM menu.

PAGE4: Shows the STEADY SHOT, IR-RECEIVE, IMG-FLIP, REVERSE PAN, DISPLAY INFO, COLOR BAR and FLICKER CANCEL settings selected with the SYSTEM menu.

PAGE5: Shows the settings of the type of output connector on the camera or on the optional interface board inserted into the camera.

The DOWN CONVERTER menu is displayed only when the HFBK-SD1 SD Interface Board is inserted into the card slot of the camera.

Select the component signal output from the MONITOR connector (D-sub 9-pin) on the HFBK-SD1 SD Interface Board.

YPbPr: Outputs analog component signals.

RGB: Outputs RGB signals.

Appears when RGB is selected with D-SUB OUT1 and specifies whether to add a sync signal.

RGB: Outputs each R, G and B signal with a sync signal added.

G:Outputs the G signal with a sync signal added. OFF: Outputs each signal with no sync signal added.

Select the output signal from the MONITOR connector on the HFBK-SD1 SD Interface Board.

VBS: Outputs analog composite signals.

Y/C: Outputs S-video signals.

Select the aspect ratio of the output signal. 16:9[LETTER]: The image is displayed in 16:9

letterbox.

4:3[CROP]: The image is displayed in 4:3 edge crop.

4:3[SQUEEZE]: The image is displayed in 4:3 squeeze.

STATUS Menu / DOWN CONVERTER Menu