Sony HD 3CCD operating instructions To recall the stored settings, To cancel the preset memory

Operation

Storing the Camera Settings in Memory

– Presetting Feature

Up to six combinations of settings (six positions) including camera position, zooming, focusing, and backlighting, can be preset.

Note

The camera can store up to sixteen combinations of settings (sixteen positions) in the memory, but the supplied Remote Commander supports preset of six positions only (POSITION 1 to 6). Use the RM-BR300 Remote Control Unit (not supplied) to store the settings in POSITION 7 to 16.

For details of the camera settings to be preset, see “Presetting Items” on page 70.

POWER

To recall the stored settings

Press any of the POSITION buttons, 1 to 6, in which you have stored the settings.

To cancel the preset memory

While holding down the RESET button, press the POSITION button from which you want to cancel the settings.

DATA SCREEN		BACK LIGHT
STD	REV
1	2	3	Press a POSITION
4	5	6
			button.
PRESET		RESET
	POSITION

While holding down

Notes

•	When the power is turned on, the camera starts with
	the settings stored in POSITION 1.
•	If you want to retain the previous pan and tilt
	positions, etc. when the power is turned off and turned
	on again, store those positions in POSITION 1.

Using the Supplied Remote Commander

CAMERA	SELECT		3	MANUAL
	2
1	FOCUS NEAR					BACK		LIGHT
AUTO	FAR
		SCREEN								3
							REV
	DATA								2
				STD
					1					5
								4
3 PRESET									PRESET

2

2

3 POSITION 1-6

6
RESET						RESET
POSITION
	-TILT		-TILT			1
PAN			PAN ET
	HOME		RES
			FAST
	SLOW	ZOOM		T
						W
		T				-EV100
			W			RM
			L/R	ON	SET
			DIRECTI

•	Storing or canceling the settings in POSITION 1 takes
	about 2 seconds longer than those of other positions.
•	When you are storing or canceling the settings in one
	POSITION, you cannot call up, store or cancel the
	settings in another POSITION.

1 Press the PAN-TILT RESET button to reset the pan/ tilt position.

2 Adjust the position, zooming, focusing and backlighting of the camera (pages 39 to 41).

3 While holding down the PRESET button, press any of the POSITION buttons, 1 to 6, in which you want to store the settings.

DATA SCREEN		BACK LIGHT
STD	REV
1	2	3	Press a POSITION
4	5	6
			button.

PRESET RESET

While holding down POSITION

The message “PRESET No.xx” (selected POSITION number) is output from the component or RGB output connector and is displayed for about 2 seconds.

42

Storing the Camera Settings in Memory – Presetting Feature