Sony HD 3CCD To connect multiple cameras to the SD sync signal generator, Sync

To connect multiple cameras to the SD sync signal generator

You can connect up to seven cameras.

Third to Seventh (last)

BRC-H700

			75-ohm termination
			switch: ON
			to AC outlet
	EXT	VIDEO	Video monitor, etc.
	SYNC IN
		to video input
			Second BRC-H700
			75-ohm termination
availableCommercially separatorsignaltype-T			switch: OFF
			to AC outlet
	EXT SYNC IN
			First BRC-H700
			75-ohm termination
			switch: OFF
			to AC outlet

EXT SYNC IN

75-ohm coaxial cable

to SYNC OUT

SD sync signal generator

Note

Signal processing in the interface board causes all output signals from the HFBK-SD1 to be delayed by approximately 93H (horizontal sync time) compared with the YPbPr/RGB output signals from the camera.

If you want to synchronize the phase between signals output from the HFBK-SD1 and those from an SD sync signal generator, set SYNC MASTER to SD1 in the SYSTEM menu (page 35).

Installation and Connections

Connections

63