Sony HD 3CCD operating instructions Connecting the RM-BR300 Remote Control Unit

Connecting the RM-BR300 Remote Control Unit

Use the RS-232C connecting cable supplied with the Remote Control Unit.

to AC outlet

VISCA RS-232C IN

RS-232C cable*

VISCA RS-232C

RM-BR300 Remote Control Unit

DC IN 12V

AC power cord*

to AC outlet

AC power adaptor*

* supplied with the RM-BR300

Note

When using the VISCA RS-232C connectors, check that the BOTTOM switch on the bottom of the camera (page 19) and the DIP switch on the bottom of the Remote Control Unit (page 23) are set to RS-232C.

To connect the Remote Control Unit using the VISCA RS-422 connectors

You can use the VISCA RS-422 connectors to connect the RM-BR300 Remote Control Unit to the camera instead of the VISCA RS-232C connectors. Use of the VISCA RS-422 connectors allows the connection up to 1,200 m (3,937 feet) away.

Prepare the connecting cable using the RS-422 connector plugs that come with the camera and the Remote Control Unit.

For making the cable, refer to the pin assignments of the VISCA RS-422 connector (pages 76 and 77) and the wiring diagram of VISCA RS-422 connection

(page 79).

For the use of the RS-422 connector plugs, see back cover.

to AC outlet

VISCA RS-422

VISCA RS-422 cable

VISCA RS-422

to AC outlet

RM-BR300 Remote Control Unit

Notes

•When using the VISCA RS-422 connectors, check that the BOTTOM switch on the bottom of the camera (page 19) and the DIP switch on the bottom of the Remote Control Unit (page 23) are set to RS-422.

•When the connections using the VISCA RS-422 connectors are made, the VISCA RS-232C connection is not available.

Installation and Connections

Connections

55