Using the VISCA RS-422 Connector Plug

1 Insert a wire (AWG Nos. 28 to 18) into the desired wire opening on the VISCA RS-422 connector plug, and tighten the screw for that wire using a flat- head screwdriver.

Flat-head screwdriver

To remove the connector plug

Grasp both ends of the VISCA RS-422 connector plug and pull it out as shown in the illustration.

1

2

3

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wire

2 Insert the VISCA RS-422 connector plug into the VISCA RS-422 connector.

1

2

3

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Printed on 100% recycled paper.

Notes

In order to stabilize the voltage level of the signal, connect both ends to GND.

When the connections using the VISCA RS-422 connectors are made, the VISCA RS-232C connection is not available.

The maximum connection distance with the VISCA RS-422 connection is approximately 1,200 m (3,937 feet).

Sony Corporation

Printed in Japan

Page 80
Image 80
Sony HD 3CCD operating instructions Using the Visca RS-422 Connector Plug, To remove the connector plug