Sony HD 3CCD operating instructions Storing Camera Settings, To select positions 9 to

Operation Using the RM-BR300 Remote Control Unit

Storing the Camera Settings in Memory

– Presetting Feature

Up to sixteen combinations of settings (sixteen positions), including camera position, zooming, focusing, and backlighting, can be stored in the memory of the camera using the RM-BR300 Remote Control Unit.

For details of the camera settings to be preset, see “Presetting Items” on page 70.

Storing Camera Settings

To select positions 9 to 16

While holding down the SHIFT button, press the PRESET button (to store the settings) or the RESET button (to cancel the settings). The lower indicator on the SHIFT button will light and the POSITION 1 to 8 buttons can be used for positions 9 to 16.

When you release the SHIFT button, the upper indicator lights and the POSITION 1 to 8 buttons can be used for positions 1 to 8.

Lights for positions 1 to 8.

SHIFT

Lights for positions 9 to 16.

		RESET			4 1
VALUE		LOCK			PANEL	BLACK	PAN-TILT	ONE PUSH
											MENU
					LIGHT	LIGHT	RESET		AWB
			RESET
–	+
	R		PRESET			POSITION
BRIGHT		MODE
			SHIFT	1	2	3	4	5	6	7	8
				9	10	11	12	13	14	15	16
–	+		L/R	STD	REV
	B		DIRECTION			CAMERA
		AUTO
FOCUS		AUTO	POWER	1	2	3	4	5	6	7
		MANUAL
		ONE PUSH
NEAR	FAR	AF

42

1Press the PAN-TILT RESET button to reset the pan/ tilt position.

2Press the CAMERA button to select the camera whose settings you want to preset.

3Adjust the position, zooming, focusing and backlighting of the camera. (See page 44 to 47.)

4While holding down the PRESET button (for POSITION 1 to 8) or the SHIFT and PRESET buttons (for POSITION 9 to 16), press any of the

POSITION buttons in which you want to store the settings.

While holding down (for POSITION 1 to 8)

RESET			Press a POSITION button.
PRESET
SHIFT	1	2	3	4	5	6	7	8
	9	10	11	12	13	14	15	16

While holding down (for POSITION 9 to 16)

The settings are stored in the memory of the camera.

The pressed button flashes during storing. Flashing stops when storing is completed.

To recall the stored settings

Press any of the POSITION buttons in which you have stored the settings.

For POSITION 9 to 16, hold down the SHIFT button and press any of the POSITION buttons.

To cancel the preset memory

While holding down the RESET button (for POSITION 1 to 8) or the SHIFT and RESET buttons (for POSITION 9 to 16), press the POSITION button from which you want to cancel the settings.

While holding down (for POSITION 1 to 8)

RESET			Press a POSITION button.
PRESET
SHIFT	1	2	3	4	5	6	7	8
	9	10	11	12	13	14	15	16

While holding down (for POSITION 9 to 16)

The pressed button flashes during canceling of the settings. Flashing stops when the settings have been canceled.

Notes

•When the power is turned on, the camera starts with the settings stored in POSITION 1.

•If you want to retain the previous pan and tilt positions when the power is turned off and turned on again, store those positions in POSITION 1.

•When you are storing or canceling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION.

48

Storing the Camera Settings in Memory – Presetting Feature