5.Plug the unit into an electrical outlet and then press power. A red Power On light and the blue light to indi- cate medium cube size selection (default size) will come on to indicate that the unit is ready to begin the ice making cycle.
6.Press ‘Select’ to select the size of ice cube you desire: small, medium or large. A blue light will indicate the size selected.
7.The first cycle may take up to 14 minutes to complete, depending on the starting temperature of the water. To minimize the cycle time, always start with fresh clean cold water.
Note: If starting water temperature is too warm it is possible that the ice produced during the first cycle will be smaller than the selected size. This function is a normal consequence of the method required to produce clear ice and applies to the first cycle only.
8.The Add Water Indicator will light when the water level is low. The unit will automatically power off. To continue producing ice, simply add more water. The unit will automatically restart when the water level is sufficient to produce ice. If no more ice is needed, press On/Off to turn the unit off.
9.The Ice Full Indicator will light when the ice storage basket is full. To continue operation, simply remove some ice from the storage basket. The unit will automatically restart approximately one minute after ice is moved away from the sensor. If no more ice is needed, press On/Off to turn the unit off.
10. Please keep the lid in the closed position while the ice maker is running except to remove ice or add water. Use included ice scoop to remove ice from storage basket.
